Filter
Top Products
23
Working with clip thumbnails (continued)
Thumbnail screen
Press the THUMBNAIL button to display the thumbnail
screen on the LCD. Press the THUMBNAIL button again
to return to the normal display.
Press the MENU BAR button on the thumbnail screen to
change the pointer to a menu bar. In this state, menu
actions can be performed on thumbnails.
Thumbnail selection operations
Multiple thumbnails can be selected as desired on the
thumbnail screen.
(1) Use the search dial to move the pointer (yellow
box) to the clip you want to select, and then
press the SET button.
(2) To select more clips, repeat step (1).
When the STOP button is pressed while holding down the
SHIFT button, all the selected clips are released together.
Notes:
•
Turn the search dial clockwise (or press the FF button)
to move the pointer to the right and turn it
counterclockwise (or press the REW button) to move
the pointer to the left. Similarly, turn it clockwise while
holding down the SHIFT button to move the pointer
downward, and turn it counterclockwise while holding
down the SHIFT button to move the pointer upward.
• The pointer moves to the first or last clip when the
REW or FF button is pressed while holding down
the SHIFT button.
• A green box appears around the selected clip
thumbnail. Press the SET button again to deselect
the thumbnail.
•
If, after one clip has been selected, the pointer is
moved to another clip and then the SET button is
pressed while holding down the SHIFT button, all the
clips from the clip selected last to the clip where the
pointer is currently positioned are selected together.
PULL
COUNTER
MENU
TC PRESET
SELECT
SLOT
RESET
THUMBNAIL
MARKER
BAR
MENU
SET
SEARCH
RECPLAY
FFREW STOP
PREV NEXT
SHIFT
SHTL
PUSH
JOG
SLOW
Memory Card Recorder AJ-
TC
REGEN
PRESET
REC RUN
FREE RUN
DIAG
THUMBNAIL button
MENU BAR button
SET button
Search dial
TC REGEN/PRESET switch
Display status
The display status indicates the type of thumbnails
displayed on the screen.
ALL :All clips are displayed.
SELECTED :Clips selected by the user are displayed.
MARKED :Clips with shot marks are displayed.
VOICE MEMO :Clips containing voice memo data are
displayed.
SLOT :Clips on a specific P2 card are displayed.
For details, see “Switching the thumbnail display” on
page 25.
Slot number
The slot number indicates which P2 card contains the clip
at the pointer location. The slot number of the P2 card
containing the clip recording is displayed in yellow. If a
clip recording is spread across multiple P2 cards, the slot
numbers of all of the P2 cards containing part of the clip
recording are displayed.
In addition, the slot number of the slot where the P2 card
is inserted is displayed in white.
Clip number
Numbers set by the memory card recorder are assigned
to all clips on the P2 card. The numbers are assigned in
chronological sequence, starting with the earliest
recording. Clip numbers for clips with different recording
formats or other clips that cannot be played by the
memory card recorder are displayed in red.
Thumbnail
The first frame in each recorded clip is displayed as a
thumbnail.
Time display
The time display varies depending on the display
settings. It shows the time code at the start of a clip
recording, or the user’s bit at the start of a clip recording,
the recording time, or the recording date.
For details, see “Thumbnail display settings” on page 28.
By default, the time code at the start of a clip recording is
displayed.
Thumbnail screen
Notes:
•Thumbnails operations are not available during time
code or user’s bit settings when the TC
REGEN/PRESET switch is set to PRESET, or during
the access to the setup menu.
•The time taken to display the thumbnails differs
depending on the number of clips recorded on the P2
card. “UPDATING” is displayed on the thumbnail
screen until the thumbnails are displayed.