Filter
Top Products
32
Working with clip thumbnails (continued)
Contents of P2 Card Status Display
Settings
From the menu bar, select [PROPERTY], then [CARD
STATUS]. The following screen is displayed.
When REMAIN has been selected
Write protect mark
If the P2 card containing the clip is write-protected, a
mark is displayed here.
P2 card status (remaining free memory)
The free memory remaining on the P2 card is displayed
here in the form of a bar meter and a percentage value.
As less and less free memory remains, the bar meter
decreases toward the left.
One of the following messages may be displayed
instead, depending on the card status.
FORMAT ERROR
: An unformatted P2 card is inserted in
the slot.
NOT SUPPORTED
: A card which is not supported by the
memory card recorder is inserted.
NO CARD: No P2 card is inserted.
P2 card remaining memory/total memory
This area shows the P2 card’s remaining memory/total
memory. The indicated values are given in minute
increments. Fractions of a minute are rounded off on the
display so that the sum total of the remaining memory
available for recording on each P2 card may not tally with
the figure for the total memory.
Slot remaining free memory total
The figure obtained by totaling the remaining free
memory of the five slots is shown here.
Note that free space on write-protected P2 cards is not
included in the free space total.
When USED has been selected
Write protect mark
If the P2 card containing the clip is write-protected, a
mark is displayed here.
P2 card status (memory used)
The amount of memory used on the P2 card is
displayed here in the form of a bar meter and a
percentage value. As more and more memory is used,
the bar meter increases toward the right. Depending on
the status of the card, one of the following displays may
appear.
FORMAT ERROR
: An unformatted P2 card is
inserted in the slot.
NOT SUPPORTED
: A card which is not supported by the
memory card recorder is inserted.
NO CARD: No P2 card is inserted.
P2 card used memory/total memory
The amount of memory used on the P2 cards and their
total memory capacities are displayed here. The memory
amounts are indicated in minutes. Any amount less than
one minute is rounded off so that the total for the amounts
of memory used for each of the P2 cards and their total
memory capacities may not match. The amount of memory
used for a write-protected P2 card is indicated as 100%.
Total memory used in slots
The figure representing the total memory used by the
cards in the five slots is shown here.