Filter
Top Products
51
Setup menus (continued)
No./Item Description
USER menu <EDIT>
303
STD/NON-STD
This selects STD or NON-STD in
accordance with the composite input
signal.
0000
AUTO :
Standard/non-standard signals are
automatically identified and
processed.
0001 STD :
Standard signals are processed.
(Forced STD)
0002 N-STD :
Non-standard signals are processed.
(Forced NON-STD)
Notes:
•Use the non-standard (NON-STD)
setting when video or audio trouble
occurs with signals from laser discs or a
satellite.
•At the NON-STD setting, the images
shown on the front panel's LCD monitor
will be significantly disrupted when the
unit's operation is transferred from the
play mode to EE mode: this is normal
and not indicative of malfunctioning.
304
REF LOCK
This selects the REF LOCK mode.
0000
AUTO :
Servo is synchronized with the input
signal during recording, or with the
REF signal during playback.
0001 EXT :
Servo is synchronized at all times with
the REF signal.
0002 AUTO1 :
Servo is synchronized with the input
signal during recording, or with the
REF signal during playback.
When there is no reference (REF)
signal, the EE output is synchronized
with the internal reference signal at
the AUTO setting or with the STD
input signal at the AUTO1 setting.
The AUTO1 setting is selected when
the STD signal is to be used.
Note:
At the AUTO setting, the images shown
on the front panel's LCD monitor will be
significantly disrupted when the unit's
operation is transferred from the play
mode to EE mode: this is normal and not
indicative of malfunctioning.
315
AFTER
CUE-UP
This selects the mode after cue-up
operation is complete.
0000
STOP : STOP mode
0001 STILL : SHTL STILL mode
320
VAR FWD MAX
This sets the maximum SLOW FWD
speed.
0000
+4 : +4x speed
0001 +2 : +2x speed
0002 +1 : +1x speed
Note:
At any speed setting other than 0 (+4),
the phase cannot be synchronized from
the editing controller.
321
VAR REV MAX
This sets the maximum SLOW REV
speed.
0000
–4 : –4x speed
0001 –2 : –2x speed
0002 –1 : –1x speed
No./Item Description
323
JOG FWD MAX
This sets the maximum JOG FWD
speed.
0000 +4 : +4x speed
0001 +2 : +2x speed
0002
+1 : +1x speed
Notes:
•The maximum speed is set to +1 x
when the dial on the front panel is
operated.
•At any speed setting other than 0 (+4),
the phase cannot be synchronized from
an editing controller which synchronizes
the phase using the JOG command.
324
JOG REV MAX
This sets the maximum JOG REV
speed.
0000 –4 : –4x speed
0001 –2 : –2x speed
0002
–1 : –1x speed
Note:
The maximum speed is set to –1 x when
the dial on the front panel is operated.
The underlined items indicates the initial setting.