Filter
Top Products
50
Setup menus (continued)
The underlined items indicates the initial setting.
No./Item Description
USER menu <INTERFACE>
201
9P SEL
This selects whether the REMOTE
(9P) connector functions when the
REMOTE button is lit.
0000 OFF :
Connector does not function.
0001
ON : Connector functions.
204
RS232C SEL
This selects whether the RS-232C
connector functions when the
REMOTE button is lit.
0000
OFF :
Connector does not function.
0001 ON : Connector functions.
205
BAUD RATE
These settings are for selecting the
RS-232C communication speed (baud
rate). (Unit: Bps)
0000 300
0001 600
0002 1200
0003 2400
0004 4800
0005
9600
206
DATA LENGTH
These settings are for selecting the
RS-232C data length. (Unit: bit)
0000 7
0001
8
202
ID SEL
This sets the ID information to be
returned to the controller.
0000 OTHER
0001
DVCPRO
0002 ORIG
Notes:
•ID information of any VTR except for
the DVCPRO’s is set in OTHER.
•Select ORIG only when the unit has
been connected to the specified
controller.
207
STOP BIT
These settings are for selecting the
RS-232C stop bit length. (Unit: bit)
0000
1
0001 2
No./Item Description
208
PARITY
These settings are for selecting the
none, odd or even for the RS-232C
parity bit.
0000
NON :
Parity bit is not used.
0001 ODD:
An odd number of bits is used for the
parity system.
0002 EVEN:
An even number of bits is used for the
parity system.
209
RETURN ACK
These settings are for selecting
whether the ACK code is to be
returned when a command is received
from RS-232C.
0000 OFF : ACK code is not returned.
0001
ON : ACK code is returned.