Filter
Top Products
59
No./Item Description
Setup menus (continued)
No./Item Description
USER menu <V BLANK>
02
REC LINE3
03
REC LINE4
This selects the additional line where
the signals are to be recorded.
Note:
This menu option is not displayed when
setting “1” has been selected as the
additional line mode.
[625i system]
0000 7L
::
0015 22L
::
0019
323L
::
0031 335L
0032 623L
[525i system]
0000 10L
::
0012 22L
0013 263L
::
0017
276L
::
0025 284L
0026 525L
The underlined items indicates the initial setting.
00
REC LINE1
This selects the additional line where
the signals are to be recorded.
[625i system]
0000 7L
::
0002 9L
::
0015 22L
0016 320L
::
0031 335L
0032
623L
[525i system]
0000 10L
::
0002 12L
::
0012 22L
0013 263L
0014 273L
::
0025 284L
0026
525L
01
REC LINE2
This selects the additional line where
the signals are to be recorded.
[625i system]
0000 7L
::
0015 22L
0016 320L
::
0018
322L
::
0031 335L
0032 623L
[525i system]
0000 10L
::
0012 22L
0013 263L
0014 273L
::
0016
275L
::
0025 284L
0026 525L
801
ADD LINE 50
This selects the mode for recording
signals on additional lines.
0000 OFF :
No signals are recorded on additional lines.
0001 YC422 :
The 422 mode signals are recorded
on 2 lines.
0002 Y4_B/W :
Only the Y signal is recorded on 4
lines directly.
0003 Y4_BPF :
Only the Y signal is recorded on 4
lines after it has been separated from
the C signal.
0004 C4 :
Only the C signal is recorded on 4 lines.
Notes:
•When a setting from “0001 (YC422)” to
“0004 (C4)” is selected and the STOP
button is pressed, operation transfers to
the sub-screen, and the recording lines
can be selected.
To return from the sub-screen, press
the STOP button again.
•The setting takes effect when the
system format is 50 Mbps.
Sub-screen
This selects the additional line where
the signals are to be recorded.
Note:
This menu option is not displayed when
setting “1” has been selected as the
additional line mode.
[625i system]
0000 7L
::
0003
10L
::
0015 22L
0016 320L
::
0032 623L
[525i system]
0000 10L
::
0003
13L
::
0012 22L
0013 263L
::
0025 284L
0026 525L
802
TELETEXT
SEL
(For AJ-SPD850P)
This selects the type of teletext
signals to be recorded.
0000 MOJI : MOJI system
0001
NABTS : NABTS system
Notes:
•This menu option is not displayed in the
625i system.
•VITC signals are often mistakenly
detected as teletext signals when the
NABTS system has been selected. If
this happens, select MANU as the
setting for setup menu No. 803
(TELETEXT DET), then select the line
for teletext signals.