Filter
Top Products
Operating Instructions
105
• You can find the camera IP address and port number by looking up the
MAC address of your camera.
Notes
• If you try to find multiple cameras, each MAC address beside the Ethernet
(LAN) port verifies which camera you are setting up.
• See page 14 in the Installation/Troubleshooting for the setup from the
MAC address.
Automatic Setup (Local or Internet Access) or Manual Setup
1. Click [Execute] on the Camera List window shown on page 104.
2. Click each button to execute the program.
Notes
• For the first time installation or after pressing the FACTORY DEFAULT
RESET button, you must select [Automatic Setup (Local Access Only)]. To
start the Manual Setup, execute Automatic Setup (Local Access Only)
first, and then start the Setup Program to execute the Manual Setup.
• See Installation/Troubleshooting for the local and Internet access setup.
Sets up Local Access.
Sets up Internet Access.
Starts the Manual Setup.
Displays the Setup page (see
page
28).
Camera
Status
Camera
List window
Port
No.
MAC
Address
IP
Address