Panasonic BL-C30 Digital Camera User Manual


 
Operating Instructions
59
Notes
If your camera will only be accessed on your local network, use each
camera's local IP address and port number.
If you intend to access your camera from the Internet, you must use each
cameras’ global IP address and respective port number.
4. Click [Save] when finished.
New settings are saved.
The Multi-Camera Setup page is displayed.
Setting Description
Display Check the box to enable the camera.
IP Address
*1
or
Host Name
*2
Set the IP address or the host name to enable the camera.
Port No. Set the port number (1—65535).
Camera Name
*3
This camera name is displayed only on the Multi-Camera
page.
*1
Set 4 digits (0—255) and 3 periods such as "192.168.0.253". But "0.0.0.0" and
"255.255.255.255" are not available.
*2
Enter ASCII characters for the host name (see page 111). But [Space], ["], ['],
[#], [&], [%], [=], [+], [?], [<] and [>] are not available.
Enter 1—255 characters.
*3
Enter ASCII characters (see page 111) or characters in each language (1—15
characters for a 1-byte character and 1—7 characters for a 2-byte character).
But [Space], ["], ['], [#], [&], [%], [=], [+], [?], [:], [<], and [>] are not available.