Filter
Top Products
Operating Instructions
72
Sensor
deactivation
time
• Set the length of time during which the sensor cannot be
triggered after saving images temporarily or transmitting
them. This function is recommended to use not to send too
many E-mails to a mobile phone.
Note
The internal memory cannot buffer images during Sensor
deactivation time. Because of this, images taken before
detection are not saved in internal memory, and so cannot
be received. Depending on the settings for image buffer/
transfer, even if it is set to, for example, take "1 image per
second, and store 10 images, before detection", because
the images are not stored in internal memory, if the sensor
detects something directly after the end of Sensor
deactivation time, the images may not be saved. Ten
seconds after the end of Sensor deactivation time, images
can be received as specified in the settings.
Setting Description