Filter
Top Products
Operating Instructions
29
Basic
(1) Network Configures the network settings such as connection mode
to connect the camera to the network (see page
31).
(2) Wireless Configures wireless network (see page 36).
(3) UPnP Enables automatic port forwarding or shortcut to the
camera (see page
40).
(4) Viewnetcam.
com
Registers with the Viewnetcam.com service (see page 41).
(5) Date and Time Sets the date and time, automatic time adjustment and
adjust clock for daylight saving time settings (see page
43).
(6) Camera Sets camera name, white balance, AC power source
frequency and pan/tilt range (see page
45).
Account
(7) Administrator
*1
*1
If you change [Administrator], [General User], [Limit Continuous Motion JPEG] or [Multi-
Camera Setup page] settings, changes will not be applied to the video (Motion JPEG)
viewers. Restart the camera to make changes applied to all video viewers.
Sets authentication setting and administrator security (user
name and password) (see page
49).
(8) General User
*1
Sets general user security (user name and password) and
general user's feature restriction (see page
53).
Advanced
(9) Image Display Sets resolution, image quality and refresh interval of Single
Camera and Multi-Camera page, Limit Continuous Motion
JPEG
*1
language and banner (see page 55).
(10) Multi-Camera
*1
Sets the camera IP address or host name, camera name on
the Multi-Camera page (maximum 12 cameras) (see page
58).
(11) Buffer/Transfer Sets image buffer or transfer by timer or sensor. (See page
60 or page 68).
(12) Operation
Time
Sets time period to display camera images (see page 78).