Filter
Top Products
Operating Instructions
19
Registering a Preset Button
8 preset buttons can be registered. Preset buttons (1—4) are registered 1: Upper
Left, 2: Upper Right, 3: Lower Left and 4: Lower Right. These buttons can be
changed (see page
21).
• Registered buttons are shown in blue.
• Unregistered buttons are shown in white.
1. Click [Program].
• [Program] switches to [Cancel].
Click [Cancel] to quit without saving
changes.
2. Pan and tilt the camera to a desired
position.
3. Click a preset button (1—8) to register.
E.g.:
Setting "Middle" for the preset 5.
4. Enter the preset name.
• Maximum 15 characters.
• Enter ASCII characters (see page
111) or characters in each
language. But [Space], ["], ['], [&], [<]
and [>] are not available.
5. Click [Save] to register, or click [Back]
and [Cancel] to cancel.
• If "Success!" is displayed, click
[Back].
Notes
• When registering preset buttons,
the camera also saves brightness
and white balance settings.
• Only an administrator can register
preset buttons.
Pan/Tilt
Setting
a name
The button
turns blue.
Preset
Preset
number