Panasonic BL-C30 Digital Camera User Manual


 
Operating Instructions
25
4. Display images clicking buttons below.
Notes
Date, Time and frame number are not displayed in play mode.
Maximum number of buffered images change depending on resolution, image
quality and what object the camera buffers. At the 320 x 240 pixels resolution
and the standard quality, the camera buffers about 250 frames (see page
112).
(If 3 trigger settings are enabled, the internal memory capacity is divided into
3 sections. In this case, each trigger can buffer about 80 frames.)
1.4.1 Deleting Buffered Images
If you intend to delete images for each transfer condition, click [Delete Buffered
Images] on the Image Buffer/Transfer page (see page
60 or page 68).
Notes
When you change settings (except for Enable/Disable settings) on the Image
Buffer/Transfer page, the buffered images only for that trigger will be deleted.
The following operations also delete all buffered images.
Turning off the camera.
Saving the Date and Time page.
Restarting, updating firmware or resetting the camera to factory default.
Changing the Enable/Disable settings of Image Buffer/Transfer (see page
60 or page 68).
Date and time of the day when the
images were buffered are displayed.
Date, time and frame number are
displayed.
[Play]:
The buffered images are displayed
continuously.
[<Prev] or [Next>]:
The previous or next image is
displayed.
[<10] or [10>]:
The 10th image before or after the
current image is displayed.
[<100] or [100>]:
The 100th image before or after the
current image is displayed.