Filter
Top Products
Operating Instructions
36
2.3 Using Wireless LAN
Wireless communication is possible by adjusting the settings of the wireless LAN
to those for the wireless router. Take a note of the settings and save them for
reference. For more information about wireless setting, please refer to http://
panasonic.co.jp/pcc/products/en/netwkcam/technic/wireless/cam_set.html
1. Click [Wireless] on the Setup page.
2. Set each parameter for the Wireless Configuration.
Setting Description
SSID • The SSID must be set to match the SSID your wireless
router or wireless LAN uses. The SSID is limited to 32
characters (alpha numeric) and is case sensitive.
Communication
mode
• In "802.11b", there are a lot of 802.11b-compliant products
and they are inexpensive. They are widely prevalent, so
"802.11b" is useful when using your existing wireless
devices.
• "802.11b/g" supports both 802.11b and 802.11g wireless
LAN standards. It is the communication mode that is easy
to install on your existing wireless LAN.
• "802.11g exclusive" communicates using 802.11g only. It
does not support the mixed standard mode of 802.11b/g,
so it allows the use of original features of 802.11g.
*1
*1
Even if "802.11g exclusive" is in use, the existence of other wireless devices using 2.4
GHz bandwidth —including 802.11b wireless devices— may make the baud rate of
802.11g slower.