Filter
Top Products
-16-
UNINSTALLING THE CAMERA
Caution:
Make sure you perform the steps below carefully
and exactly when uninstalling the camera and deco-
rative cover. Failure to do so creates the risk of dam-
age to the camera.
■ Uninstalling the Camera
The camera and its base unit are secured by screws.
This configuration provides double anchoring, and you
should use the following procedure to uninstall the cam-
era.
1. Remove the fixing screw that secures the camera to
the mounting base.
Put the screw in a place where it will not become
lost.
2. Remove the camera from the mounting base.
Rotate the camera in the direction indicated by the
arrow and remove it.
3. Remove the safety wire from the mounting base.
Camera
Camera
Mounting
Base
Fixing screw
Rotate
15°
After loosening
the screw, press
upwards on the
camera and then
remove it.