USING THE SETUP MENU
■ Setup Menu
Setup menus are shown in the diagram below. You can adapt the camera to your requirements by setting up the
respective items in these menus. Menus are incorporated in a hierarchical structure, from the setup menu at the top
to manual mask area selection at the bottom. These menus are described on the following pages for reference.
Switches, buttons, keys and the joystick are used in the setup operations.
-20-
Setup
Menu
Preset Menu (P. 26)
Map Menu
Home Position Setting (P. 31)
Self Return Setting (P. 31)
Auto Mode Selection (P. 32)
Auto Pan Key Setting (P. 33)
Special 1 Menu (P. 35)
Digital Flip Setting (P. 34)
Camera Menu (P. 42)
Camera ID Editing (P. 42)
Shutter Speed Setting (P. 44)
AGC Mode Selection (P. 45)
Electronic Sensitivity
Enhancement (P. 45)
Synchronization (P. 45)
White Balance (P. 46)
Motion Detector (P. 47)
Auto Focus Setting (P. 48)
Special 2 Menu (P. 49)
RS-485 Setup (P. 19)
Password Lock (P. 34)
Preset No.Setting (P. 26)
Preset Setting Menu
(P. 26)
Auto Pan Setting (P. 32)
INT Manual Selection (P. 45)
LL Manual Selection (P. 45)
VD2 Automatic Selection
(P. 45)
Manual Level Adjustment
(ATW1, ATW2) (P. 46)
Manual Level Adjustment
(AWC) (P. 47)
Sensitivity Level Adjustment
(P. 47)
Manual Mask Area
Selection (P. 45)
Camera ID Display Position
(P. 42)
ALC Mode with BLC ON
(P. 43)
V-phase Manual
Adjustment (P. 45)
Privacy Zone ON/OFF
(P. 35)
Proportional Pan/Tilt
(P. 36)
Area Title (P. 37)
Patrol Learn (P. 38)
Alarm IN/OUT (P. 40)
Cleaning (P. 41)
Electric Zoom (P. 41)
Preset Alarm (P. 41)
Image Hold (P. 42)
Tilt Angle (P. 42)
Mask Area Selection
(P. 47)
Demonstration Display
Password Registration
(P. 34)
Password Verification (P. 34)
ALC Mode with BLC OFF
(P. 44)
Light Control Setting (P. 43)