Filter
Top Products
-37-
● Area Title (AREA TITLE)
Up to 8 area titles can be added in specific positions.
1. Select ON (NESW), ON (USER) or OFF with the joy-
stick.
ON (NESW): An area title is displayed for indicating
the camera direction: North (N), North-East (NE),
East (E), South-East (SE), South (S), South-West
(SW), West (W) and North-West (NW).
ON (USER): A user customized area title appears in
a maximum of 16 characters.
OFF: Area title does not appear.
Factory default setting: OFF
2. Press the CAM (SET) button. A submenu appears
except when OFF is selected.
Settings for ON (NESW)
1. Move the cursor to PUSH SET for PAN/TILT, and
press the CAM (SET) button. PAN/TILT is highlight-
ed and "U TILT D/L PAN R" appears.
2. Turn the camera north with the joystick, and press
the CAM (SET) button. The origin of the direction
(North) is set.
Note:
Area titles are highlighted until the origin is set.
** SPECIAL 1 **
PRIVACY ZONE OFF
PROPO.P/T ON
AREA TITLE ON(USER)
PATROL STOP
ALARM IN/OUT
CLEANING OFF
EL-ZOOM ON
PRESET ALM OFF
IMAGE HOLD OFF
TILT ANGLE 0°
RET
→
PUSH SET
→
PUSH SET
** DIRECTION(NESW) **
PAN/TILT
ZOOM/FOCUS
POSI
+
N
RET
→
PUSH SET
→
PUSH SET
→
PUSH SET
** DIRECTION(NESW) **
PAN/TILT
ZOOM/FOCUS
POSI
U TILT D/L PAN R
+
N
RET
3. Move the cursor to PUSH SET for ZOOM/FOCUS,
and press the CAM (SET) button. ZOOM/FOCUS is
highlighted and "U ZOOM D/L FOCUS R" appears.
4. Adjust the zoom or focus with the joystick.
5. Move the cursor to POSI
O, and press the CAM
(SET) button. The area title position appears on the
monitor screen. If needed, change the display posi-
tion with the joystick, and press the MON (ESC) but-
ton.
An area title always appears under the camera ID.
If the camera ID and an area title are set to be
shown in separate positions, the area title appears
above the camera ID.
6. Move the cursor to RET, and press the CAM (SET)
button. The SPECIAL 1 menu appears again.
Setting for ON (USER)
If ON (USER) is selected on the SPECIAL 1 menu,
the AREA TITLE (USER) menu appears. The screen
has a number column and title column above RET
and RESET.
Note:
An area number followed by an asterisk * has
already been preset.
→
PUSH SET
→
PUSH SET
** DIRECTION(NESW) **
PAN/TILT
ZOOM/FOCUS
POSI
U ZOOM D/L FOCUS R
+
N
RET
FLOOR 1
N
** SPECIAL 1 **
PRIVACY ZONE OFF
PROPO.P/T ON
AREA TITLE ON(USER)
PATROL STOP
ALARM IN/OUT
CLEANING OFF
EL-ZOOM ON
PRESET ALM OFF
IMAGE HOLD OFF
TILT ANGLE 0°
RET