Filter
Top Products
5. Move the cursor to COARSE with the joystick.
6. Match the vertical phases for both video output sig-
nals as closely as possible with the joystick. The
coarse adjustment can be performed in steps of
22.5 degrees (16 steps) with the joystick.
Note:
After the 16th step, the adjustment level returns
to the first step.
7. Move the cursor to FINE by using the joystick.
8. Match the vertical phase for both video output sig-
nals as closely as possible with the joystick.
Notes:
• When the "|" cursor reaches the "+" end, it jumps
back to "–". At the same time, COARSE is incre-
mented by one step to enable a continuous
adjustment. The reverse takes place when the "|"
cursor reaches the "–" end.
• When the joystick is kept at the right or left for
one second or more, the "|" cursor moves quick-
ly.
• To reset COARSE and FINE to the preset values,
press the F3 button of WV-CU650. For WV-RM70,
press the right and left switches simultaneously.
COARSE is preset to zero-crossing of the AC line
phase.
• If the AC line phase contains spike noise, etc.,
the vertical phase of the video output signal may
be disturbed.
● White Balance (WHITE BAL)
(1) Auto-Tracing White Balance Mode (ATW1/ ATW2)
1. Move the cursor to WHITE BAL and select ATW1
with the joystick. The white balance of the camera is
automatically adjusted.
2. For fine adjustment of ATW1/ATW2, press the CAM
(SET) button. The ATW1/ATW2 fine adjustment
menu appears on the monitor screen.
3. Move the cursor to RET with the joystick and press
the CAM (SET) button to return to the SET UP menu.
** SYNC **
V PHASE
COARSE
FINE
RET
4(1--16)
- +
** SYNC **
V PHASE
COARSE
FINE
RET
1(1--16)
- +
••••••|••
•|•••••••
** SET UP **
CAMERA ID
ALC/MANUAL
SHUTTER
AGC
SENS UP
SYNC
WHITE BAL
MOTION DET
AF MODE
RET SPECIAL2
OFF
ALC
AUTO
ON(MID)
OFF
INT
ATW1
OFF
AUTO L
** ATW1 **
R
B
RET
••••|••••
- +
••••|••••
- +
-46-
** SYNC **
V PHASE
COARSE
FINE
RET
1(1--16)
•|•••••••
- +
1 (1 - - - 16): 0 degrees
2 (1 - - - 16): 22.5 degrees
16 (1 - - - 16): 337.5 degrees
** SYNC **
V PHASE
COARSE
FINE
RET
1(1--16)
•|•••••••
- +