Filter
Top Products
26
O I
CONTROL IN IP/RP
Examples of connections
4. When connecting a pan-tilt head through a network and controlling the camera
and pan-tilt head using a personal computer
Personal computer
(Windows)
Pan-tilt head cable:
AW-CA50F29
Printed circuit board
switches:
WEB settings
AC adapter:
AW-PS300
HUB
OUse the camera/pan-tilt head connecting cable (AW-CA50F29) to connect the pan-tilt
head with the convertible camera in which a WEB card (AW-PB309), etc. has been
installed.
OSet the printed circuit board switches to the WEB settings.
OUse a 10BaseT straight cable (UTP category 5) to connect the personal computer
(Windows) and convertible camera via a hub.
OInstall browser software (Netscape or Internet Explorer) in the personal computer
(Windows).
OUse the browser software to input the IP address which was set on the WEB card,
and check that the pan-tilt head and camera can be controlled using the personal
computer.
10BaseT straight cable:
UTP category 5, max. 328 feet (100 meters)
10BaseT straight cable:
UTP category 5, max. 328 feet (100 meters)
Cable with a nominal cross
section of 1.25 mm
2
or more
max. 98.4 feet (30 meters)