Filter
Top Products
28
Examples of connections
6. When controlling the camera and pan-tilt head using a personal computer, etc.
and transmitting component signals
O I
CONTROL IN IP/RP RS-422 RS-232C
Y/VIDEO OUT
Pr/SDI OUT
Pb OUT
Y IN
Pr IN
Pb IN
Personal computer
(Windows)
Pan-tilt head cable:
AW-CA50C29
Printed circuit board
switches:
Analog settings
AC adapter:
AW-PS300
Color monitor
RS-232C crossover cable
max. 49.2 feet (15 meters)
RS-232C/RS-422 converter:
Consult your dealer.
Coaxial cables:
BELDEN 8281
(Cable compensation is
necessary if this cable it going
to be run over a long distance.)
OUse the camera/pan-tilt head connecting cable (AW-CA50C29) to connect the pan-tilt
head with the convertible camera.
OSet the printed circuit board switches to the analog settings.
OUse coaxial cables (BELDEN 8281) to connect the Y/VIDEO OUT, Pr/SDI OUT and
Pb OUT connectors on the pan-tilt head with the Y IN, Pr IN and Pb IN connectors on
the color monitor, respectively.
OConnect the CONTROL IN IP/RP connector on the pan-tilt head to the RS-232C
connector on the personal computer (Windows) via an RS-232C/RS-422 converter.
(Consult your dealer)
OCheck that the pan-tilt head and camera can be controlled using the personal
computer.
10BaseT straight cable:
UTP category 5, max. 3,280 feet
(1,000 meters)
Cable with a nominal cross
section of 1.25 mm
2
or more
max. 98.4 feet (30 meters)