Panasonic VQT2F10 Digital Camera User Manual


 
- 109 -
Advanced (Recording pictures)
Note
The screen will change as following when the motion picture button is pressed in steps 3 and
4.
¢1 The screen that is displayed during motion picture mode setting is different depending on the
setting of the
[REC MODE].
¢2[!] will not be displayed in the Creative Motion Picture Mode.
Start recording by pressing the motion
picture button.
A Available recording time
B Elapsed recording time
The audio is also recorded simultaneously from the
built-in microphone on this unit. (Motion pictures
cannot be recorded without audio.)
The recording state indicator (red) C will flash while recording motion pictures.
Focus can be achieved during recording by pressing [FOCUS].
Focus can be set manually when [MF] is displaying. (P83)
Stop the recording by pressing the motion picture button again.
Sound will go off when pressing the motion picture button indicating start/stop of motion
picture recording.
Sound volume can be set in [BEEP LEVEL] (P30).
If the built-in memory or the card becomes full in the middle of recording, the camera
stops recording automatically.
A Still picture recording
screen
B Motion picture mode
setting
¢1
C Motion picture
recording screen
D Still picture mode
setting
¢2
B
A
C
5
5
R1m19s
R1m19s
R1m19s
3s
3s
3s