Filter
Top Products
Advanced (Recording pictures)
- 74 -
Note
•
When using a tripod etc., setting the self-timer to 2 seconds is a convenient way to avoid the
jitter caused by pressing the shutter button.
•When you press the shutter button once fully, the subject is automatically focused just before
recording. In dark places, the self-timer indicator will blink and then may turn on brightly
operating as an AF assist lamp (P146) to allow the camera to focus on the subject.
•We recommend using a tripod when recording with the self-timer.
•The number of pictures which can be taken in Burst Mode is fixed to 3.
•The number of pictures which can be taken in [FLASH BURST] (P101) is fixed to 5.
•Depending on the recording conditions, the recording interval may become more than
2 seconds when [10S/3PICTURES] is selected.
•The flash output may not be constant when [10S/3PICTURES] is selected.
•[10S/3PICTURES] cannot be set when any of Intelligent Auto Mode, Auto Bracket, Color
Bracket, or [PANORAMA ASSIST], [FLASH BURST] or [PHOTO FRAME] in Scene Mode is
set.
•You cannot use Burst Mode when [10S/3PICTURES] is selected.
•Setting of the self-timer cannot be performed in following conditions.
–In [HI-SPEED BURST] in Scene Mode
–When recording motion pictures