Filter
Top Products
- 79 -
Advanced (Recording pictures)
Note
•
Focus, exposure and white balance are fixed to the settings used for the first picture.
•When the self-timer is used, the number of recordable pictures in Burst Mode is fixed to 3.
•If you are following a moving subject while taking pictures in a place (landscape) indoors,
outdoors etc. where there is a large difference between the light and shade, it may take time
until the exposure is stable. If burst is used at this time, the exposure may not become optimal.
•The burst speed (pictures/second) may become slower depending on the recording
environment such as in dark places, if the ISO sensitivity is high etc.
•Burst Mode is not canceled when the camera is switched off.
•If you take pictures in Burst Mode with the built-in memory, it will take time to write the picture
data.
•[Œ] is set for the flash when burst is set.
•Auto Bracket/Color Bracket is canceled when burst is set.
•You cannot use Burst Mode in the following conditions.
–In [PANORAMA ASSIST], [HI-SPEED BURST], [FLASH BURST], [STARRY SKY],
[PIN HOLE], [FILM GRAIN], [HIGH DYNAMIC] and [PHOTO FRAME] in Scene Mode
–When [QUALITY] is set to [ ] or [ ]
–When recording motion pictures