Filter
Top Products
- 35 -
Preparation
•When the [RESET] setting is selected during recording, the operation that resets the lens is
also performed at the same time. You will hear the sound of the lens operating but this is
normal and not indicative of malfunctioning.
•When the [REC] Mode settings are reset, data registered with [FACE RECOG.] will be also
reset, too.
•When [SETUP] menu settings are reset, the following settings are also reset. In addition,
[ROTATE DISP.] (P165) is set to [ON], and [FAVORITE] (P166) is set to [OFF] in [PLAYBACK]
Mode menu.
–The birthday and name settings for [BABY1]/[BABY2] (P98) and [PET] (P99) in Scene Mode.
–The [TRAVEL DATE] (P124) setting. (Departure date, return date, destination)
–The [WORLD TIME] (P127) setting.
–The [CUST. SET MEM.] (P88) setting.
–Position memorized in [ZOOM RESUME]/[MENU RESUME].
•The folder number and the clock setting are not changed.
•When [PC] is selected, the camera is connected via the “USB Mass Storage” communication
system.
•When [PictBridge(PTP)] is selected, the camera is connected via the “PTP (Picture Transfer
Protocol)” communication system.
w [RESET]
The [REC] or [SETUP] menu settings are reset to the initial
settings.
x [USB MODE]
Select the USB communication system after or before connecting
the camera to your PC or your printer with the USB connection
cable (supplied).
y [SELECT ON CONNECTION]:
Select either [PC] or [PictBridge(PTP)] if you connected the
camera to a PC or a printer supporting PictBridge.
{ [PictBridge(PTP)]:
Set after or before connecting to a printer supporting PictBridge.
z [PC]:
Set after or before connecting to a PC.