Panasonic VQT2F10 Digital Camera User Manual


 
- 17 -
Preparation
Charging
The indicated charging time is for when the battery has been discharged completely.
The charging time may vary depending on how the battery has been used. The charging
time for the battery in hot/cold environments or a battery that has not been used for long
time may be longer than normal.
When the charging has been completed successfully, the [CHARGE] indicator turns off.
Charging time and number of recordable pictures with the optional battery pack are the
same as above.
When the [CHARGE] indicator flashes
The battery temperature is excessively high or low. The charging time will be longer than
normal. Also, charging may not be completed.
The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth.
Battery indication
The battery indication is displayed on the LCD monitor/Viewfinder.
[It does not appear when you use the camera with the AC adaptor (optional) connected.]
The indication turns red and blinks if the remaining battery power is exhausted. (The power
lamp also blinks) Recharge the battery or replace it with a fully charged battery.
Note
After charging is completed, be sure to disconnect the power supply device from the electrical
outlet.
The battery becomes warm after using it and during and after charging. The camera also
becomes warm during use. This is not a malfunction.
The battery will become discharged if left for a long period of time after being charged.
The battery can be recharged even when it still has some charge left, but it is not
recommended that the battery charge be frequently topped up while the battery is fully
charged. (The battery has characteristics that will reduce its operating duration and cause the
battery to swell up.)
When the operating time of the camera becomes extremely short even after properly charging
the battery, the life of the battery may have expired. Buy a new battery.
Do not leave any metal items (such as clips) near the contact areas of the power plug.
Otherwise, a fire and/or electric shocks may be caused by short-circuiting or the
resulting heat generated.
Charging time Approx. 120 min