Filter
Top Products
- 207 -
Others
•It is recommended to use a card with SD Speed Class
¢
with “Class 6” or higher when recording
motion pictures.
¢ SD speed class is the speed standard regarding continuous writing.
•Depending on the type of the card, recording may stop in the middle.
> When you set the picture quality to [ ], [ ] or [ ], we recommend using a
high-speed card with “10MB/s” or greater displayed on the package.
> If motion picture recording stops during use of a card of at least “10MB/s” or if you use a
card that has been formatted on a PC or other equipment, the data-writing speed is lower.
In such cases, we recommend that you make a backup of the data and then format (P37)
the card in this unit.
•Is the [CONVERSION] (P148) set to [ ] or [ ]?
•Set the AF area to the distinctive color of the subject if there is a part that is different from the
surrounding color. (P138)
A reddish vertical line (smear) appears on the LCD monitor during
picture-taking.
•
This is a characteristic of CCDs, and it appears when the subject has a
bright part. Some unevenness may occur in the surrounding areas, but
this is not a malfunction.
It is recorded in motion pictures but is not recorded on still pictures.
•It is recommended that you take pictures while taking care not to expose
the screen to sunlight or any other source of strong light.
Motion picture recording stops in the middle.
Zoom does not operate properly
Subject cannot be locked.
(AF tracking not possible)
C