Panasonic VQT2F10 Digital Camera User Manual


 
Preparation
- 18 -
Recording still pictures (When using the LCD monitor/Viewfinder)
Recording conditions by CIPA standard
CIPA is an abbreviation of [Camera & Imaging Products Association].
Temperature: 23 oC (73.4 oF)/Humidity: 50% when LCD monitor is on.
¢
Using a Panasonic SD Memory Card (32 MB).
Using the supplied battery.
Starting recording 30 seconds after the camera is turned on. (When the optical image stabilizer
function is set to [AUTO].)
Recording once every 30 seconds with full flash every second recording.
Rotating the zoom lever from Tele to Wide or vice versa in every recording.
Turning the camera off every 10 recordings and leaving it until the temperature of the battery
decreases.
¢ The number of recordable pictures decreases in Auto Power LCD Mode and Power LCD
Mode. (P31)
The number of recordable pictures varies depending on the recording interval time.
If the recording interval time becomes longer, the number of recordable pictures
decreases.
[e.g. When recording once every 2 minutes, the number of recordable pictures
decreases to about 117.]
About the Battery Life
Number of recordable
pictures
Approx. 470 pictures
(By CIPA standard in Program AE
Mode)
Recording time Approx. 235 min