Filter
Top Products
Connecting to other equipment
- 178 -
∫ Other linked operations
Turning the power off:
If you use the remote control for the TV to turn off the power, the power on this unit also
turns off. (When connecting the unit to a PC with a USB cable, the power will not turn off.)
Automatic input switching:
•
If you connect with a HDMI mini cable and then turn on the power on this unit, the input channel
on the TV automatically switches to this unit’s screen. If the TV’s power is in standby status, it
will turn on automatically (if [Set] has been selected for the TV’s [Power on link] setting).
•Depending on the HDMI terminal on the TV, the input channel may not switch automatically. In
this case, use the remote control for the TV to switch the input channel. (For details on how to
switch input, please read the operating instructions for the TV.)
•If VIERA Link does not work properly, refer to page 212.
Note
•
If you are unsure whether or not the TV you are using are compatible with VIERA Link, read the
operating instructions for the devices.
•Available linked operations between this unit and a Panasonic TV is different depending on the
types of Panasonic TVs even if they are compatible with VIERA Link. Refer to the operating
instructions of the TV for the operations that support on the TV.
•Operation is not possible with a cable that is not based on the HDMI standard.
Do not use any other cables except a genuine Panasonic HDMI mini cable (RP-CDHM15,
RP-CDHM30; optional).
Part numbers: RP-CDHM15 (1.5 m) (5 feet), RP-CDHM30 (3.0 m) (10 feet)
•VIERA Link will not work even if you connect the HDMI mini cable while the unit is connected to
the PC or the printer.
•[HDMI MODE] (P36) [1080i] is valid only for the following conditions:
Outputting to HDMI:
–When [PICTURE] is selected in the [MODE PLAY]
–When [PICTURE ONLY] is selected in the [SLIDE SHOW]
–When [CATEGORY SELECTION]
¢
is selected in the [SLIDE SHOW]
–When [CATEGORY PLAY]
¢
is selected
When the [VIERA Link] is set to [ON]:
–During playback of still pictures on one screen after selecting [ ] displayed on the TV
screen
–When [PICTURE ONLY] is selected for the [SLIDE SHOW]
–When [CATEGORY SELECTION]
¢
is selected for the [SLIDE SHOW]
–When [CATEGORY PLAY]
¢
is selected in the [ALL] and [ ]
¢ Other than [ ] (travel date) and [
Í] ([AVCHD Lite], [MOTION JPEG])
–It will be output as [720p] except for the above conditions.
•If you have set [HDMI MODE] (P36) to [AUTO] or [1080i] on this unit and selected [ ] on the
TV screen for one screen display, the screen may go dark for a short time when the HDMI
output resolution changes. This is not a malfunction.
•If the picture is disrupted when [HDMI MODE] (P36) is set to [AUTO] or [1080i], change the
setting to [720p].
•[ ] ([TRAVEL DATE]) or [Í] ([AVCHD Lite], [MOTION JPEG]) in the
[CATEGORY SELECTION] of the [SLIDE SHOW] cannot be selected when the [ ] displayed
on the TV screen is selected.