Panasonic VQT2F10 Digital Camera User Manual


 
Advanced (Recording pictures)
- 138 -
Setting up [ ] (AF Tracking)
Note
If it fails to lock, AF area will flash in red, and disappear. Try to lock again.
AF tracking will not operate when the subject is not specified, the subject is lost, or has failed to
be tracked. The picture will be taken with [
Ø] in [AF MODE] in that case.
[ ] cannot be selected when [COLOR EFFECT] is set or in [PANORAMA ASSIST],
[FIREWORKS], [STARRY SKY], [PIN HOLE], [FILM GRAIN] and [HIGH DYNAMIC] in Scene
Mode.
[FACE RECOG.] does not work when AF tracking is active.
[ ] does not work in AF tracking.
The focus range is 1 cm (0.04 feet) (Wide)/1 m (3.28 feet) (Tele) to .
Dynamic tracking function may not work in the following cases:
When the subject is too small
When the recording location is too dark or bright
When the subject is moving too fast
When the background has the same or similar color to the subject.
When jitter is occurring
When using the zoom
1 Bring the subject to the AF tracking
frame, and press [AF/AE LOCK] to lock
the subject.
A AF tracking frame (White)
B AF tracking frame (Yellow)
AF area will be displayed in yellow when a
subject is recognized, and exposure and
focus will automatically adjust continuously
following the subject’s movement (Dynamic
tracking).
AF tracking is canceled when [AF/AE
LOCK] is pressed again.
Before locking Locked
2 Take the picture.
A
B