Filter
Top Products
Preparation
- 34 -
•Refer to P62 for details.
•The Auto Review function is activated regardless of its setting when using Auto Bracket (P76)/
Color Bracket (P77), [HI-SPEED BURST] (P100), [FLASH BURST] (P101) and
[PHOTO FRAME] (P107) in Scene Mode and Burst Mode (P78). (The pictures cannot be
enlarged.)
•In Intelligent Auto Mode, the Auto Review function is fixed to [2SEC.].
•If [HIGHLIGHT] (P32) is set to [ON], white saturated areas appear blinking in black and white
when the Auto Review function is activated.
•[AUTO REVIEW] does not work when recording motion pictures.
•Focus position will not be recorded.
•The folder number is updated and the file number starts from 0001. (P183)
•A folder number between 100 and 999 can be assigned.
When the folder number reaches 999, the number cannot be reset. We recommend formatting
the card (P37) after saving the data on a PC or elsewhere.
•To reset the folder number to 100, format the built-in memory or the card first and then use this
function to reset the file number.
A reset screen for the folder number will then appear. Select [YES] to reset the folder number.
[PLAY ON LCD]
If you selected the Viewfinder in a Recording Mode, the display
will automatically switch to the LCD monitor when reviewing or
playing back the pictures.
[OFF]/[ON]
o [AUTO REVIEW]
Set the length of time that the picture is displayed after taking it.
[OFF]
[1SEC.]
[2SEC.]
[HOLD]: The pictures are displayed until one any of the buttons
is pressed.
[ZOOM]: The picture is displayed for 1 second and then
enlarged 4k and displayed for 1 more second.
[ZOOM RESUME]
Record the zoom position when the camera is turned off.
[OFF]
[ON]
It will automatically return to the zoom position when the power
was switched [OFF], next time you turn the power [ON].
v [NO.RESET] Reset the file number of the next recording to 0001.