Panasonic VQT2F10 Digital Camera User Manual


 
- 143 -
Advanced (Recording pictures)
For details on [REC] Mode menu settings, refer to P27.
You can take a picture brightly in dark places by setting [MIN. SHTR SPEED] slower. Also,
you can set it faster to reduce the blur of the subject.
Applicable modes:
[1/250], [1/125], [1/60], [1/30], [1/15], [1/8], [1/4], [1/2], [1]
Note
This should usually be set to [1/4] to take pictures. (When you select a minimum shutter speed
other than [1/4], [ ] appears on the screen.)
Setting [MIN. SHTR SPEED] to slower speed might increase the chance of jitter, so we
recommend using a tripod and the self-timer for taking pictures.
Setting [MIN. SHTR SPEED] to faster speed might make the picture darker, so we recommend
recording the picture in well-lit area. If correct exposure cannot be achieved, [ ] will flash in
red when the shutter button is pressed halfway.
The setting is not available when [INTELLIGENT ISO] is being used.
For details on [REC] Mode menu settings, refer to P27.
This can enlarge subjects even more than the Optical Zoom or Extended Optical Zoom.
Applicable modes:
[OFF]/[ON]
Note
Refer to P52 for details.
If camera shake (jitter) is a problem during zooming, it is recommended that [STABILIZER] be
set to [AUTO] or [MODE 1].
The setting is fixed to [ON] in Macro Zoom Mode.
[MIN. SHTR SPEED]
Minimum shutter speed setting 1/250 1
Brightness Darker Brighter
Jitter Less More
[DIGITAL ZOOM]