Filter
Top Products
- 77 -
Advanced (Recording pictures)
[REC] Mode:
In this mode, up to 3 pictures in black & white, standard, or sepia in the selected modes
are automatically recorded each time the shutter button is pressed.
Press 3 [È] several times to display [AUTO BRACKET].
Press [DISPLAY] to display [COLOR BRACKET].
• It is switched between Auto Bracket and Color Bracket every
time [DISPLAY] is pressed.
Press 2/1 to select the mode.
Press [MENU/SET] to close the menu.
• You can also press the shutter button halfway to finish.
• You cannot use Color Bracket in the following conditions:
–When [QUALITY] is set to [ ] or [ ]
–When recording motion pictures
Note
•
When setting Auto Bracket, [ ] appears on the screen.
•When setting Color Bracket, [ ] appears on the screen.
•When taking pictures using Auto Bracket after setting the exposure compensation range, the
pictures taken are based on the selected exposure compensation range.
When the exposure is compensated, the exposure compensation value appears on the lower
left of the screen.
•The exposure may not be compensated with Auto Bracket depending on the brightness of the
subject.
•The Auto Bracket/Color Bracket setting is canceled if you turn the camera off or
[POWER SAVE] is activated.
•When Auto Bracket/Color Bracket is set, the Auto Review function is activated regardless of the
Auto Review setting. (The picture is not enlarged.) You cannot set the Auto Review function in
the [SETUP] menu.
•In Shutter-Priority AE and Manual Exposure, if the shutter speed is set to more than 1 second,
Auto Bracket is canceled.
•[Œ] is set for the flash when Auto Bracket/Color Bracket is set.
•Burst is canceled when Auto Bracket/Color Bracket is set.
•The one set last will take precedence. (Auto Bracket and Color Bracket cannot be set
simultaneously.)
Color Bracket
OFF
[MODE1]:
[B/W]/[STANDARD]
[MODE2]: [STANDARD]/[SEPIA]
[MODE3]:
[B/W]/[STANDARD]/[SEPIA]