Filter
Top Products
Advanced (Recording pictures)
- 84 -
If you tilt the joystick towards 3/4 when [MF ASSIST] is set to [MF1] or [MF2], MF
assistance is activated and the screen is enlarged. This allows you to focus on the subject
more easily.
Select [MF ASSIST] on the [SETUP] menu. (P27)
Press 3/4 to select [MF1] or [MF2] and then press [MENU/SET].
Press [MENU/SET] to close the menu.
• You can also press the shutter button halfway to finish.
∫ Changing the zoom area
The magnified area can be changed while
the screen is expanded using MF Assist.
This is convenient when you want to change
the focus position to take pictures.
1 Display MF Assist with 3/4 on the
joystick.
2 Change the area to be expanded with the
cursor buttons 3/4/2/1.
3 Press [MENU/SET] to set.
•
The following will return the MF assistance to
the original position.
–Changing the picture size or aspect.
–Turning the camera off.
MF ASSIST
[MF1] The center of the screen is enlarged. You can adjust the focus while
determining the composition of the whole of the screen.
[MF2] The center of the screen is enlarged over the whole screen. This is
convenient for adjusting the focus in wide angle shots for which changes
in focus are difficult to grasp.
[OFF] The screen is not enlarged.
3.3
3.3
6.6
6.6
3.3
3.3
6.6
6.6
ft.
ft.
ft.
ft.