Filter
Top Products
Advanced (Recording pictures)
- 116 -
Stop the recording by pressing the motion picture button again.
• If the card becomes full in the middle of recording, the camera stops recording
automatically.
• You can also start/stop motion picture recording by pressing the shutter button.
• Sound will go off when pressing the motion picture button or shutter button indicating
motion picture recording start/stop.
Sound volume can be set in [BEEP LEVEL] (P30).
∫ Setting the aperture value and shutter speed for each [EXPOSURE MODE]
Note
•
Aperture value
–Set the aperture value to a higher number when you want a sharp focus background. Set the
aperture value to a lower number when you want a soft focus background.
•Shutter speed
–When you want to take a sharp picture of a fast moving subject, set with a faster shutter
speed. When you want to create a trail effect, set to a slower shutter speed.
–Manually setting a higher shutter speed may increase the noise on-screen due to the higher
sensitivity.
–When recording under lighting such as fluorescent lighting, mercury lighting and sodium
lighting, the coloring and brightness of the screen may change.
•Refer to “Recording Motion Picture” on P108 for other settings and operations for recording
motion pictures.
•The sound recording specifications on this model have been changed to improve audio
quality. For this reason, some motion pictures recorded in [MOTION JPEG] may not be
played back with Panasonic digital cameras (LUMIX)
¢
.
(Motion pictures recorded with a Panasonic digital camera (LUMIX) can be played back
on this model.)
¢ Models launched before December 2008, and some models launched in 2009 (FS, LS
series).
[EXPOSURE MODE] Aperture value Shutter speed (Sec.)
P —
—
A
F2.8 to F8.0 (Wide)/F4.4 to F13
(Tele)
S — 1/30 to 1/20000th
M
F2.8 to F8.0 (Wide)/F4.4 to F13
(Tele)
1/30 to 1/20000th
(When using manual focus, the
shutter speed can be set from
1/8 to 1/20000th.）