Filter
Top Products
C2688M-C (12/08) 11
Figure 5. EDI5000 Data Interface Desktop Placement
WALL MOUNT INSTALLATION
The data interface can be mounted to a wall using the optional WM5001-4U wall mount system. You can mount up to four data interface units,
in any combination, in a fully expanded WM5001-4U (one WM5001-4U with up to three WM5001-4UEXP expansion units).
NOTE: The maximum number of data interface units that can be used in the system depends on the number of matrix system keyboards. If the
matrix system includes more than one keyboard, you can install one data interface unit for each matrix keyboard.
1. Install the WM5001-4U and any WM5001-4UEXP expansion units; refer to the WM5000 Series Wall Mount Kit Installation manual
(C1616M) for instructions.
2. Install the data interface into the desired wall mount unit. Make sure all front and rear panel connectors are accessible.
Figure 6. Installing the EDI5000 in a WM5001-4U Wall Mount
WARNING: Do not place the data interface on its side; the unit could fall over and cause damage.
EDI5000
IOIOI 2
IO
IOI 1