Filter
Top Products
C2688M-C (12/08) 13
3. Tighten the thumbscrew on the rack mount to secure the unit into the rack (refer to Figure 9).
Figure 9. Tighten Thumbscrew to Secure the Unit
PELCO BADGE ORIENTATION
The Pelco badge on the front panel of the data interface can be rotated in quarter turns. If you install the unit on a flat surface, the Pelco badge
will be turned the wrong way.
To rotate the Pelco badge:
1. Use the Pelco badge rotation sticker that came with the unit.
2. Attach the middle portion of the rotation sticker to the badge.
3. Press firmly with your thumb and rotate the badge to its correct position.
4. Remove the rotation sticker from the badge.
Figure 10. Pelco Badge Orientation
TIGHTEN
THUMBSCREW
EDI5000
IO
IO
I 2
IO
IO
I 1
EDI5000
IO
IO
I 2
IO
IO
I 1
PELCO BADGE