Filter
Top Products
36 C2688M-C (12/08)
Controlling Recorded Video
Figure 38 illustrates the joystick options for controlling recorded video when viewing at normal magnification (refer to Using Digital Zoom on
page 38 for instructions on viewing in digital zoom mode).
Figure 38. Controlling Recorded Video with the Joystick on the AD2088 Keyboard
Table C identifies the keyboard actions and joystick movements that control recorded video.
Table C. Controlling Recorded Video
Command Key Joystick
Play Open (Play) Up
Pause Close (Pause) Down
Fast Forward; you can only fast forward to the end of the recorded
video, which includes recorded video up to the present
Far (Fast Forward) Right
Rewind Near (Rewind) Right
Step Forward (when recorded video is paused) Far (Fast Forward) Right
Step Back (when recorded video is paused) Near (Rewind) Left
Display or remove monitor text (such as camera number and title) Ack (Eject) N.A.
Toggle (switch between live and recorded video); recorded video
must be in Play or Pause mode; if no video has been recorded, the
monitor displays live video and the keyboard beeps
N.A. Press joystick button
Start an Endura script Type the script number and then press Run N.A.
Stop an Endura script Type the script number and then press Hold N.A.
Mark an event Press the Salvo button at the beginning of
the video that you want to define as an event
N.A.
Go to the next marked event Next N.A.
Go to the previous marked event Last N.A.
Jump back from the current time Type the number of minutes that you want to
jump back, and then press Off (Stop)
N.A.
PLAY
PAUSE
FORWARDREWIND
TOGGLE BETWEEN
LIVE AND RECORDED
VIDEO