Filter
Top Products
C2688M-C (12/08) 35
Figure 37. Operating the EDI5000 with the AD2088 Keyboard
VIEWING AND CONTROLLING VIDEO
To view live video from the matrix system, use the matrix system commands and keyboard options (refer to the matrix system documentation).
To view recorded video from a matrix system camera or to view video from an Endura system camera (either live or recorded), follow the
instructions provided in this section.
NOTE: Video received from the Endura system is displayed on the matrix system monitor with a border, as follows:
• Live video from an Endura system camera is displayed with a green border.
• Recorded video is displayed with a yellow border. Recorded video can be either of the following:
– Recorded video from an Endura system camera.
– Video from a matrix system camera that was recorded in the Endura system.
• Recorded video starts at the point configured by the Initial Jump Back Seconds setting (as described in Change Configuration Settings on
page 23). For example, if the Initial Jump Back Seconds setting is 60 seconds, recorded video starts at 60 seconds back from the present.
PTZ Control
If the camera displayed on the monitor includes PTZ functions, use the keyboard joystick and keys to control the PTZ functions.
How to Toggle Between Live and Recorded Video
Use the joystick button on the AD2088 keyboard to toggle between live and recorded video (refer to Figure 38 on page 36). The data interface
uses the camera offset value (described in Change Configuration Settings on page 23) to map the recorded video for each matrix system camera.
SITE
OPERATE
PROGRAM
MENU
MONITOR
VCR
RUN
SALVO
SLOTS
POKER PIT
CRAPS
BLACK
JACK
COUNT
ROOM
HOLD
LAST
PROG SITE
F1
F2
NEXT
CLEAR MON
OFF
12
5
3
46
8
0
79
ON
PRE
SET
PATRN
NEAR
ACK
VCR
CAM
CAMERA
ENTER AUXILIARY
IRIS
FOCUS
TASK
CONTROL
W
I
D
E
T
E
L
E
OPEN
CLOSE
FAR
START ENDURA SCRIPT STOP ENDURA SCRIPT
PAUSE
JUMP BACK
REWIND/STEP BACK
ON-SCREEN DISPLAY
NEXT EVENT
PREVIOUS EVENT
MARK EVENT
PLAY
FAST FORWARD/
STEP FORWARD