Filter
Top Products
Chapter 2 Using ViaVideo
ViaVideo User’s Guide 32 www.polycom.com
ViaVideo detects more than one IP address when:
• There is more than one LAN card in your PC.
• You are using a docking station and a PCMCIA network card.
• You are connected to your network using a Virtual Private
Network (VPN).
If you want to change IP addresses once ViaVideo is already
running, go to the H.323 screen (System Info>Setup>H.323
Setup>H.323) and click Choose Other IP Address.
Note Choose Other IP Address is displayed in the H.323 screen
only when ViaVideo detects the presence of more than one
IP address at startup. If you add another IP address while
ViaVideo is running, you must restart the application so that
ViaVideo can detect the new IP address.
ViaVideo presents the Multiple IP Addresses screen, and you can
choose which IP address you want to use.
Once you restart the ViaVideo application, ViaVideo uses the IP
address you specified. This address is displayed in the System
Information screen, at the bottom of the application window, and in
your address book listing.
ViaVideoUG.book Page 32 Thursday, December 7, 2000 2:49 PM