Polycom ViaVideo Digital Camera User Manual


 
Chapter 3 System Information and Diagnostics
ViaVideo User’s Guide 40 www.polycom.com
Resetting the system with Delete address book entries selected
deletes all locally stored addresses, without affecting global
addresses. You will have to re-specify your ILS server when you
restart to regain access to global addresses.
Camera Calibration
The Camera Calibration screen lets you calibrate the camera for
low light settings. The first time you install the ViaVideo camera unit
on your PC, ViaVideo allows the camera to warm up to operating
temperature and automatically presents the Camera Calibration
screen so that you can calibrate the camera for low light settings.
If you want to calibrate the ViaVideo camera independent of
ViaVideo’s automatic calibration feature, you can do so using this
screen. Once your camera has been calibrated, you will not need to
calibrate it again unless you move the camera unit to a new
computer.
To calibrate your camera:
1. Slide the camera switch to the Video Mute position.
ViaVideo performs the calibration immediately once the switch
is in the Video Mute position.
2. ViaVideo notifies you when calibration is complete. This should
take just a few moments.
ViaVideoUG.book Page 40 Thursday, December 7, 2000 2:49 PM