Filter
Top Products
21
PROV950H/pp. 017-023; 96/5/8/14:00
G.K. Associates, Tokyo
If the picture is difficult to see due to ambient
lighting, etc., adjust the monitor picture.
1 Set the Power switch
to CAMERA.
2 Press the MENU button until appears
on the monitor.
3 Press C on the operation button ( ) to
select “PICTURE”.
4 PressAor on the button to select the
menu item you wish to adjust.
5 Press C or B on the button to adjust
the picture or backlight to your preference.
6 When you are finished, press the MENU
button to turn off the adjustment display.
When the Camcorder is in VCR Mode
Press the MENU button until appears on the
monitor. Then perform steps 3 through 6 as
shown.
Notes:
• In bright daylight, the monitor picture will be
easier to see if you set the backlight
(“BACKLIGHT”) to “BRIGHT”.
• The picture adjustments have been factory
preset to neutral settings, and the backlight
mode (“BACKLIGHT”) has been factory preset to
normal (“NORM”).
• When the color or tint is adjusted, the picture on
the screen may differ from the picture actually
recorded. Do not change the color and tint
settings unless it is necessary.
Picture/Backlight Adjustments
Power Switch
Operation Button
MENU Button
STOP WATCH
COUNTER
AUTO
M
E
N
U
STOP WATCH
M
E
N
U
ITEM
ITEM
S
E
T
S
E
T
BRIGHT
COLOR
TINT
PREV. PAGE
BRIGHT
COLOR
TINT
Darker
Decrease
Brighter
Increase
Red Green
GR
BRIGHT
NORM.
BACKLIGHT
BRIGHT
NORM.
First-Time
Operation
ITEM
ITEM
S
E
T
S
E
T
BACKLIGHT
BRIGHT
COLOR
TINT
PREV. PAGE
BRIGHT
NORM.