Filter
Top Products
30
PROV950H/pp. 030-035; 96/5/21/10:00
G.K. Associates, Tokyo
Quick Return
When you have been playing back what you
have recorded, and wish to quickly return to
recording again from the end of the last
recorded scene, use the quick return function.
1 Set the Power switch
to CAMERA.
2 Press the MENU button until appears
on the monitor.
3 PressAon the operation button ( ) to
select “RETURN”. The tape will begin
winding or rewinding to the end of the last
recorded scene.
• To cancel, pressAon the button to
select “RETURN” again.
4 When the tape reaches the end of the last
recorded scene, the camcorder enters
Recording Standby mode.
AUTO
AUTO
Note:
• If the cassette has been removed since the last
recording or if no recording has been made since
the cassette was loaded, the “RETURN” indicator
will be faintly displayed and the quick return
function will not operate.
Edit Search
The edit search feature lets you search, without
switching from Camera Recording mode to
VCR mode, for the point on the tape where you
wish to start recording next.
1 In Recording Standby mode, make sure
that no operation indicators are displayed
on the monitor.
• If they are displayed on the monitor, turn
them off by pressing the MODE DISPLAY
button.
2 Press the MENU button until appears on
the monitor.
3 Press C for reverse edit search or B for
forward edit search on the button.
4 When you find the point where you want to
begin recording, release the button.
Notes:
• Some picture noise appears during reverse edit
search.
• Forward edit search is performed at the same speed
as normal playback, and reverse edit search is
performed at three times the normal playback speed.
• The sound is off during edit search.
PAUSE
AUTO
Camera Recording
Operation
Button
AUTO