Filter
Top Products
36
PROV950H/pp. 036-041; 96/5/23/13:00
G.K. Associates, Tokyo
4 Press C on the button to select REW (or
B to select FF) button. “SEARCH” will start
flashing. The tape rewinds (or fast forwards)
to the beginning of a scene immediately
before (or after) the current tape position;
playback then starts automatically.
The “REW” and “FF” indicators automatically
disappear after about 10 seconds.
5 To continue searching, press C on the
button to select REW (or B to select FF)
while its indicator is displayed.
Program Search
The program search feature automatically finds
the beginning of a number of previously recorded
scenes. Up to 10 different scenes can be found on
one tape.
1 Set the Power switch
to VCR.
2 Press the MENU button until screen
appears on the monitor.
3 Press A on the operation button ( ) to
select “SEARCH”.
The camcorder enters the Program Search
mode. Both the “REW” and “FF”
indicators, or one of them will start
flashing.
To cancel, press A on the button to
select SEARCH again.
SEARCH
Basic Operations Playback
SEARCH
F
F
SEARCH
R
E
W
SEARCH
F
F
R
E
W
Example: To find the beginning of five different scenes:
Video Tape
Oldest Recording Most Recent Recording
When you are at this position:
Press C on the button to select “REW” to rewind the tape to E and begin playback.
Press B on the button to select “FF” to forward the tape to R and begin playback.
Beginnings of Scenes
Current Tape Position
Monitor Display
SEARCH
SEARCH
F
F
R
E
W
Operation
Button
Notes:
• Use this feature when the tape is stopped or being
played back.
• This function finds the beginning of the scene
immediately before or after the current tape position,
stopping at every scene. It is not possible to skip a
scene.
• This function cannot spot recordings that are shorter
than 10 seconds in length.
• In steps 3 and 5, if the tape is at a point ahead of
the most recent recording, only the “REW” indicator
will flash, and the “FF” indicator will not appear.
• In steps 3 and 5, if the tape is at a point before the
oldest recording, only the “FF” indicator will flash,
and the “REW” indicator will not appear.
• This feature does not function if no recording has
been made since the cassette was loaded, or if the
cassette has been removed after the recordings
were made. “SEARCH” is faintly displayed in this
case.
SEARCH
F
F
R
E
W
FINISHED