Filter
Top Products
38
PROV950H/pp. 036-041; 96/5/23/13:00
G.K. Associates, Tokyo
Basic Operations Playback
Counter Memory
Use the counter memory when you want to return
to the beginning of a particular scene. The
position where the counter memory is reset,
(0:00.00) is stored in memory to make it easier to
return the tape to that point.
1 During playback or recording, press the
MENU button until (VCR mode) or
(Camera mode) appears on the monitor.
2 Press A on the button to select “COUNTER”
then press C on the button to select
“MEMORY”. “M” will appear to the left of the
counter display.
3 Press B on the button to select “RESET”
at the beginning of a scene you want to
return to later.
STOP WATCH
COUNTER
M
E
N
U
COUNTER
M
E
N
U
PREV. PAGE
R
E
S
E
T
M
E
M
O
R
Y
03108
Memory Indicator
PREV. PAGE
R
E
S
E
T
M
E
M
O
R
Y
00000
5Press C on the button to select “REW”
on the screen. The tape will automatically
stop when the counter reaches 0:00.00.
6 Press on the button to select “PLAY”
on the screen to view the desired scene.
To Cancel the Counter Memory Mode
Perform step 1. Then press A on the operation
button ( ) to select “COUNTER” and then press
C on the button to select “MEMORY”. “M” will
disappear. The Counter Memory mode is now
canceled.
Notes:
• In Step 5, Bon the
button can be used to select
“FF” in the same way.
• This function does not work during video searches.
• In step 5, the tape may stop slightly ahead or
behind the point where you reset the counter to “M
0:00.00”.
Turning Off the LCD Monitor
Backlight
This camcorder’s LCD monitor uses a fluorescent
lamp for backlighting (see page 57). In order to
reduce battery consumption, you can turn off the
lamp when backlighting is not necessary (e.g.
when you are watching a playback on a
connected TV’s screen).
While the camcorder is in Camera or VCR mode,
hold down the MODE DISPLAY button for more
than 5 seconds. The backlight will turn off and the
LAMP OFF indicator will light.
To turn it on again, press the MODE DISPLAY
button or set the Power switch to OFF, and then
back to CAMERA or VCR.
4 After playback, press A on the button to
select “STOP” on the screen. If you have
been recording, stop the tape and set the
Power switch to VCR.
PLAY
STILL
STOP
F
F
R
E
W
00000
MODE
DISPLAY
MENU
LAMP OFF
Indicator
Notes:
• The LAMP OFF indicator will blink when the monitor
is off to indicate that there is a warning message.
Press the MODE DISPLAY button and check the
message on the monitor.
• Turning the LCD monitor on and off repeatedly may
deplete battery power.