Filter
Top Products
Appendices
185
H. Error Messages
If an error message is displayed on the LCD Monitor, take the corresponding action.
Error Message Cause and Action Page
INSERT CARD No card is loaded. Insert a card. P.16
SET DATE The date is not set. Set the date. P.15
FILE NUMBER OVER The file number limit has been exceeded. Please use another card, or
delete unwanted files.
P. 16
P.100
UNMATCHED FILE A file that cannot be played back was selected. -
INSUFFICCIENT MEMORY. CONTINUE? Because there is not sufficient capacity on the card, all the files cannot be
copied. Use another card.
P.108
PROTECTED You are trying to delete a protected file. P.104
WRITE-PROTECTED The card is "Locked (write-protection)". Unlock the card. P.16
PRINT SETTINGS CANNOT BE SET FOR THIS FILE. This file (movies and other) cannot be selected for printing. -
INSUFFICIENT MEMORY Files cannot be stored. Make sure there is enough free space, or delete
files.
P.100
The image print number limit has been exceeded. Select an image and set
the number to 0.
P.109
FORMAT INTERNAL MEMORY It is necessary to format internal memory. P.115
FORMAT CARD The card is not formatted. Format the card. P.114
CARD ERROR Please reformat. If, after doing so, the error message still appears, the
card may be faulty. Do not use the card.
P. 11 4
WRITE TO CARD Writing file to memory. Wait until writing finishes. -
NO FILE There are no files that can be played back. -
CANNOT RECORD The Number of remaining shots is 0. Switch to another card or internal
memory.
P. 16