56
Advanced recording
Face Detection
Face Detection detects and recognizes face-like shapes and adjusts
focus, color, and exposure automatically. Also, it adjusts recording
conditions so that they are optimized for the face detected.
Select the recording ( ) mode by pressing the [MODE]
button.
page 26
1
Press the [MENU] button
[Control (Left/Right)] button
Face Detection.
2
Select the desired submenu item
with the [Control (Up/Down)]
button, and then press the
[Control (OK)] button.
3
To exit the menu, press the [MENU] button.
Examples of the Face detection mode
When you set Face detection to On, the face detection frame
appears around faces as shown in the figure below.
The camcorder can detect up to three faces.
[220Min]STBY
9999
• The Face Detection indicator ( ) and Face Detection frame ( )
are not recorded.
• Face Detection may not operate depending on the recording
conditions. For example, the Face Detection frame may appear on a
'face-like' shape, even when the subject is not a person's face. If this
occurs, turn off the Face Detection function.
• The Face Detection frame will not work on the side of a person's
face or if the illumination is too low. You must be facing subjects
‘head-on’ and have enough illumination.
• You can also set Face Detection with the shortcut menu.
page 27
Submenu Items
Items Use
On-screen
display
Off
To disable the function.
-
On
To detect faces automatically and set the optimal
recording values.
[220Min]STBY
Exit
Face Detection
On
Off