Filter
Top Products
159
Connecting & Transferring > Connecting to a smart phone
4
Select the camera from the list on the smart phone.
•
The smart phone can connect to only one camera at a time.
•
If the Wi-Fi Privacy lock is enabled and Wi-Fi is connected, enter the
PIN displayed on the camera to the smart phone.
5
On the camera, allow the smart phone to connect to your
camera or conrm the registration request.
•
If the smart phone has been connected to your camera before, it is
connected automatically.
•
If the pop-up message that prompts you to set the auto time
setting appears, select Yes to sync the camera’s date and time to
the smart phone’s. (p. 195)
6
On the smart phone, select q to open the smart panel.
7
On the smart phone, set the shooting options.
•
While using this feature, some buttons are not available on your
camera.
•
The zoom button and the shutter button on your smart phone will
not function when using this feature.
•
Some shooting options are not supported.
•
Shooting options that you have set will remain on the camera after
the connection with the smart phone has ended.
8
Touch to return to the shooting screen.
9
On the smart phone, touch and hold to focus, and then
release it to capture the photo.
•
Touch to record a video and touch to stop a video.
•
Touch to view the captured photo and send it to the smart
phone.
•
If the GPS feature is activated on the smart phone, the GPS
information will be saved with the captured photo.
•
When you use this feature, the ideal distance between the camera and the
smart phone may vary, depending on your surroundings.
•
The smart phone must be within 23 ft (7 m) of the camera to use this feature.
•
It will take some time to capture the photo after you release on the smart
phone.
•
The Remote Viewnder function will deactivate when:
-
You answer an incoming call on the iOS devices.
-
There is an incoming call on the smart phone.
-
Either the camera or the smart phone turns o.
-
The device loses a Bluetooth or Wi-Fi connection.
-
The Bluetooth or Wi-Fi connection is poor or unstable.
-
You perform no operations for approximately 3 minutes while connected.