Filter
Top Products
180
Connecting & Transferring > Connecting to a computer
Transferring les to your Mac OS
Mac OS 10.7 or later is supported.
1
In Shooting or Playback mode, press [m]
ĺ
q
ĺ
USB
Connection
ĺ
Mass Storage. (p. 194)
2
Turn o the camera.
3
Connect the camera to your computer with the USB cable.
•
You must plug the small end of the USB cable into your camera. If the
cable is reversed, it may damage your les. The manufacturer is not
responsible for any loss of data.
•
If you try to plug the USB cable into the HDMI port, the camera may not
work properly.
•
When using a USB 2.0 cable, plug the USB cable into the lower part
of the USB port. If the plug connectors are forced, the device may be
damaged. The manufacturer is not responsible for any loss of data.
When using a USB 3.0 cable (optional), connect the USB cable as shown in
the illustration.
4
Turn on the camera.
•
The computer recognizes the camera automatically and displays a
removable disk icon.
5
On your computer, open the removable disk.
6
Select the les you want, and then drag or save them to your
computer.