Filter
Top Products
instructions on how to use the memory card
• Be sure to format the memory card (see p.46) if you are using a newly
purchased memory card for the first time, if it contains data that the
camera cannot recognise, or if it contains images captured with a dif-
ferent camera.
• Turn off the camera power whenever the memory card is being inserted
or removed.
• Repeated use of the memory card will eventually reduce the memory
card's performance. Should this be the case, you wilt need to purchase
a new memory card. Wear and tear on the memory card is not covered
by the Samsung warranty.
• The memory card is an electronic precision device.
Do not bend, drop or subject the memory card to any heavy impact.
• Do not store the memory card in an environment with strong electronic
or magnetic fietds, e.g. near loud speakers or TV receivers.
• Please do not use or store in an environment where there are extremes
intemperature.
• Do not altow the memory card to become dirty or to come into contact
with any liquid. Should this happen, clean the memory card with a soft
cloth.
• Please keep the memory card in its case when not in use.
• During and after periods of extended use, you may notice that the
memory card is warm. This isperfectly normal.
• Do not use a memory card that is used in another digital camera. To
use the memory card in this camera, format the memory card using this
camera.
• Do not use a memory card formatted by another digital camera or
memory card reader.
• If the memory card is subjected to any of the following, the recorded
data may become corrupted :
- When the memory card is used incorrectly.
- If the power is switched off or the memory card is removed while
recording, deleting (formatting) or reading.
• Samsung cannot be held responsible for lost data.
• It is advisable to copy important data onto other media as back-up e.g.
floppy disks, hard disks, CD etc.
• If there is insufficient memory available :
A [Memory Full!] message will appear and the camera wilt not operate.
To optimise the amount of memory in the camera, replace the memory
card or detete unnecessary images stored on the memory card.
[] • Don't remove the memory card when the camera status lamp is blink-
ing as this may cause damage to data inthe memory card.
READY_<i3}