Filter
Top Products
Self-timer ( _ ) / Right button
[] Motion Timer
f4
Pressing the Shuter button after Blink (1 second interval)
setting the Motion Timer
Detecting the subject's movement Blink (0.25 second interval)
No movement is detected Turn on and the image is taken after
2 seconds
MENU / OK button
[] MENU button
- When you press the MENU button, a menu related to each camera
mode will be displayed on the LCD monitor. Pressing it again wilt
return the LCD to the initial display.
-A menu option can be displayed when the following are selected :
MOVIE CLIP and STILL IMAGE mode. There is no menu available
when the voice recording function is selected.
[] The Motion Timer flows are as followings. (Movie Clip mode excluded)
Selecting the Motion Timer -4, Pressing the Shutter button -4,
Confirming the composition (Within 6 sec.) "_-4, Starting the detection
(Swing your hands fu!ty)"2-4, Stopping the detection (Do not move)
-4, Taking an image (after 2 sec.)
"1:The cameradetectsthesubject'smovement6secondsafterpressingtheShtter
button,soconfirmthecompositionwithin6seconds.
*2:Moveyourbodyorhandsfully.
lnthe following cases, the Motion Timer may not operate.
• The focus distance isover 3m.
Thedetectionrangeof
• The exposure is too bright or dark MotionTimer
• Inbacklight conditions.
• The movement is insignificant
• The movement is detected beyond the
center part (50%) of the sensor where
the movement is recognized.
• If the camera doesn't sense any
movement for 30seconds, or the
camera doesn't sense stillness after
sensing movement
[PressingtheMENUbutton]
_,_
[Menu off] [Menu on]
[] OK button
- When the menu is displayed on the LCD monitor, this button is used
for shifting the cursor to the sub menu or for confirming data.
RECORDING <3i}