Filter
Top Products
Starting the Multi Slide Show
SelectincL/m&ec!es Confiqure MultiSlide Showeffects
You can select image to view
1. Use the Up / Down buttons to select the
[image] menu and press the Right button.
2. Select a desired sub menu by pressing
the Up / Down button.
jAil] :All images saved in the Memory
are played back.
[Date] :Images taken in a specified date
are played back.
[Select] : Play only the selected images.
If you press the Right button, you can select the desired
images to play back.
The selected image can be saved as [Select1], [Select2]
and [Select3]. If you save the selected image with the [New
Select] command, it will be saved as [Select1].
But when a new image is saved again using [New Select],
the former image which had been saved as [Select1] will
be saved as [Select2] automatically.
You can change and cancel the images which were saved
as [Select1], [Select2] and [Select3].
3. Press the OK button and the settings are saved.
Unique screen effects can be used for the Multi Slide Show.
1. Select the [Effect] sub menu by press-
ing the UP / DOWN button and press the
RIGHT button.
2. Use the Up / Down button to select the
type of effect.
[Off] :No effect.
[Basic] :Fade In/Out effect is added
and the Images are displayed at set interval.
[Classic] :You can add noise to the image to give a classic feel.
[Memories] :Scratches are added to give an old movie effect.
[Rhythmic] :Images are displayed with a special effect.
[Delight] :Images are displayed with a special effect.
3. Press the OK button to confirm the setting.