Filter
Top Products
important notes
- If you use this camera in wet places, such as beach or pool, do
not let water or sand get inside the camera. Doing so may result in
failure or may permanently damage the unit.
• Extremes in temperature may cause problems.
- If the camera is transferred from a cold to a warm and humid envi-
ronment, condensation can form on the delicate electronic circuitry.
If this occurs, turn the camera off and wait for at least 1 hour until
all moisture is dispersed. Moisture built up can also occur on the
memory card. If this happens, turn off the camera and remove the
memory card. Wait until the moisture has dispersed.
• Caution on Using the Lens
- If the tens is subjected to direct sunlight, it could result in the discol-
oration and deterioration of the image sensor.
- Take care not to get fingerprints or foreign substances on the sur-
face of the tens.
• If the camera is exposed to an electronic interference, it will turn itself
off to protect the memory card.
• Camera Maintenance
- Use a soft brush (available from photo stores) to gently clean the lens
and LCD assemblies. If this does not work, tens-cleaning paper with
tens cleaning fluid can be used.
Clean the camera body with a soft cloth. Do not allow this camera to
come into contact with solvent materials such as benzol, insecticide,
thinners etc. This may damage the body shell of the camera and also
affect its performance. Rough handling can damage the LCD monitor.
Take care to avoid damage and keep the camera in its protective
carry case at all times when not in use.
• Do not attempt to disassemble or modify the camera.
• Under certain conditions, static electricity can cause the flash unit to
fire. This is not harmful to the camera and is not a malfunction.
• If the digital camera is not used for a long period, an electric dis-
charge can occur. It is a good idea to remove the battery and the
memory card if you do not intend using the camera for an extended
period of time.
When images are uploaded or downloaded, the data transfer may be
affected by static electricity, tn this case, disconnect and re-connect
the USB cable before trying the transfer again.
Before an important event or going on a trip, you should check the
camera condition.
- Take a picture for testing the camera condition and prepare extra battery.
- Samsung cannot be held responsible for camera malfunctions.
(70} PLAY